Bơm thủy lực SKF THAP E

Model: THAP 030E, THAP 150E, THAP 300E, THAP 400E
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Bơm thủy lực SKF
  • Bơm thủy lực
  • Bộ dụng cụ tháo lắp khớp nối thủy lực
  • Bộ chân đế bơm thủy lực
  • Bộ bơm dầu thủy lực SKF
  • Đồng hồ đo áp suất SKF
  • Ống dẫn thủy lực SKF
Thang.Ld@doluongbaotri.com.vn 0936 983 953 Liên hệ mua hàng

30 to 400 MPa (4 350 to 58 000 psi) 

The THAP E air-driven pumps and oil injectors are available in four different pressure versions. They are used for mounting and dismounting OK couplings, for dismounting large pressure joints such as bearings, flywheels, couplings, railway wheels and in many similar applications. The pumps consist of a high pressure hydraulic pump, driven by an air piston. The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The air driven pumps can also be supplied in complete sets which consists of pump, pressure gauge, high pressure pipe and connection nipples.

FIND A DISTRIBUTOR

Features & benefits

  • Time savings compared to hand operated pumps
  • Portable
  • Continuous supply of oil
  • Internal air pressure limiter helps ensure safe operation
  • Low air consumption
  • Wide operating temperature range
  • Sturdy storage boxes
  • Low, medium and high pressure units

Applications

  • Mounting bearings
  • SKF OK-Couplings
  • Mounting ship propellers, rudder pintles, railway wheels and other similar applications

Thông số kỹ thuật

Designation THAP 030E
Nominal hydraulic pressure 30 MPa ( 4 350 psi)
Operating air pressure 7 bar* (101.5 psi)
Air consumption 200 litre per minute / 7.1 cubic feet per minute
Operating temperature range 0 °C – 45 °C (32 °F – 113 °F) with fluid maximum viscosity of 1500 mm2/s
Volume/stroke 10 cm3 (0.61 in.3)
Oil outlet G3/4
Length 350 mm (13.9 in.)
Height 202 mm (8 in.)
Width 171mm (6.7 in.)
Weight 11,5 kg (25.3 lb)

Có thể bạn quan tâm