| Designation | TMCD 5P |
| Measuring range | 0 – 5 mm |
| Resolution | 0,01 mm |
| Scaling | 0 -100 |
| Length of extension pieces | 10, 20, 30, 40 mm (0.4, 0.8, 1.2, 1.6 in) |
| Outside diameter | 37 mm (1.5 in) |
| Dial position | Parallel to the side face of the hydraulic nut |
Đồng hồ đo áp suất dầu thủy lực SKF TMCD
Giá:Liên Hệ
- Bơm thủy lực SKF
- Bơm thủy lực
- Bộ dụng cụ tháo lắp khớp nối thủy lực
- Bộ chân đế bơm thủy lực
- Bộ bơm dầu thủy lực SKF
- Đồng hồ đo áp suất SKF
- Ống dẫn thủy lực SKF
The SKF dial indicators are used to measure the axial travel of the piston in an SKF Hydraulic nut E-design. They are used in conjunction with the SKF Drive-up Method.
FIND A DISTRIBUTOR
- TMCD 10R: Horizontal dial indicator (0–10 mm)
- TMCD 5P: Vertical dial indicator (0–5 mm)
- TMCD 1/2R: Horizontal dial indicator (0–0.5 in.)
| Designation | TMCD 1/2R |
| Measuring range | 0 – 0.5 in |
| Resolution | 0,001 in |
| Scaling | 0 -100 |
| Length of extension pieces | 10, 20, 30, 40 mm (0.4, 0.8, 1.2, 1.6 in) |
| Outside diameter | 55 mm (2.2 in) |
| Dial position | Right angle to the side face of the hydraulic nut |
| Designation | TMCD 10R |
| Measuring range | 0 – 10 mm |
| Resolution | 0,01 mm |
| Scaling | 0 -100 |
| Length of extension pieces | 10, 20, 30, 40 mm (0.4, 0.8, 1.2, 1.6 in) |
| Outside diameter | 55 mm (2.2 in) |
| Dial position | Right angle to the side face of the hydraulic nut |
Có thể bạn quan tâm
