Thiết bị đo lực kéo nén SHIMPO FGS-50XB-L/H
Giá:Liên Hệ
- Thiết bị đo lực kéo nén cầm tay SHIMPO
- Máy đo lực kéo nén cầm tay
- May do luc keo nen SHIMPO
- Lực kế điện tử
- Máy đo lực kéo nén hiển thị cơ
- Máy đo lực kéo nén chỉ thị kim
- Đồng hồ đo lực kéo nén
- Bộ gá thiết bị đo lực kéo nén SHIMPO
- Máy đo lực kéo nén vải
- Máy đo lực kéo nén giấy bìa carton
- Máy đo lực kéo nén sợi chỉ
- Máy đo độ bền kéo nén thực phẩm
- Máy đo độ bền kéo nén bao bì
FGS-50XB-L/H – Motorized Test Stands for Digital Force Gauges (Horizontal Type)
Various movement modes are available for the digital force gauge (push-pull gauge), e.g. jogging and repeated reciprocation, according to the purpose of measurement and the intended use of the test object. Five positions and stopping times are programmable. An analog output enables a connection to a pen recorder to record the displacement. Provided with an emergency stop switch to support a safe test environment.
Features
- Various movement modes are available for the force gauge, e.g. jogging and repeated reciprocation, according to the purpose and intended use.
- Equipped with an analog output to record the displacement. (There is also a series with a length measuring unit capable of displaying moving distances to two decimal places.)
- Capable of stepless travel speed adjustment.
- Ten positions and stopping times are programmable.
- It is possible to stop the movement with a comparator output signal (when an FGX Series force gauge is mounted).
- Equipped with an emergency stop switch.
Specifications
| form | Horizontal | |
|---|---|---|
| For low speed | For high speed | |
| FGS-50XB-L | FGS-50XB-H | |
| Load capacity | 500.0(50kg) | |
| Feed rate | 5〜120mm / min | 20〜500mm/min |
| 2 types of speed switching possible steplessly | ||
| stroke | 140mm (with mechanical backlash of 0.2-0.5mm) | |
| Representation: moving speed representation | 5.0~120.0mm / min | 20.0~500.0mm / min |
| Movement distance indication | 0.0〜140.0mm | |
| Repeat count display | 0〜9999 | |
| Output signal | Analog voltage output: Outputs the amount of movement of the stand 10mV/mm MAX.±1.4V RS-232C | |
| input | Overload input: FGX, FGP overload output stops the stand | |
| alarm | Stop the motor when the stand motor is overloaded | |
| Height adjustment range | 0〜35mm | |
| Measurement table | 100 × 125mm | |
| Operating temperature limit | 0 to 45°C (with no condensation) | |
| power supply | AC100V(±10%）2.5A | |
| quality | 22kg | |
| accessories | Power supply AC socket for force gauge, FGP connection cable, analog output cable | |
| Other | Emergency stop switch | |
