Thiết bị hiệu chuẩn quá trình YOKOGAWA CA300

Model: CA300
Hãng sản xuất: YOKOGAWA,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Thiết bị giao tiếp chuẩn HART
  • Thiết bị hiệu chuẩn HART
  • Bộ giao tiếp HART
  • Thiết bị hiệu chuẩn đa năng
  • Thiết bị hiệu chuẩn quá trình
  • Thiết bị hiệu chuẩn đa thông số đo

The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry machinery, and manufacturing. Available in 3 models, the CA310, CA320, and CA330 provide an ergonomic and friendly user-interface making it easy to use.

Features

  • Basic Accuracy: 0.015% (Source&Meas. accuracy of Voltage mA)
  • 20 mA SIMULATE (SINK) function
  • Simultaneously supplies 24 V
    loop power and measure output signal with high accuracy
  • HART/BRAIN comm. resistance (250Ω) embedded
  • Sub display displays span% of the source value
  • Corresponds to various types of source pattern (Step sweep/ Linear sweep/ Manual step/ Span check)
  • IIII [+] Read More

Applications

  • All types of loop test with control devices
  • Valve test
  • Temperature control, calibration
  • Temperature sensor checking

Description

The CA310 is a dedicated process calibrator which is capable in performing a control loop check and inspection of devices. It has three times higher accuracy of ±0.015% rdg.* to source and measure mA and voltage. It can be used under HART or BRAIN communication with 250 ohm resistance embedded. *“rdg.” is an abbreviation of reading which means the error rate to the measurement value.

Thông số kỹ thuật

Display: Segment LCD
Backlight: LED (Selection of “Constantly ON”, “Constantly OFF” or “Auto off by approx. 2min”)
Battery life: 50 hours (5V source, load over 10kOhm), 25 hours
(20mA source, load under 5V)
Automatic Power-off: Approximately 20 minutes (Can be disabled by setting)
Display Refresh Rate: Approx 1 sec.
Level Setting
Response of generator:
Approximately 1 second
(from when the output begins to change until when the output level falls within the specified accuracy)
Dimensions: Approximately Approx. 90 (W)×192 (H)×42 (D)
Weight: Approximately 440 g
Operating temperature/humidity: -10 to 55°C and 20 to 80%RH (no condensation)
Storage temperature: -20 to 60°C and 90%RH or less (no condensation

Xem thêm sản phẩm: Máy đo độ mờ đục – Ưu đãi 20% khi gọi 0936 983 953

Có thể bạn quan tâm