Thanh khử tĩnh điện phòng nổ KASUGA PAS-701S/CSR
Model: PAS-701S, CSR, SD-4, CSR-150P, CSR-2000P, CSR-2050P, CSR-2600P
Hãng sản xuất: KASUGA DENKI,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Hãng sản xuất: KASUGA DENKI,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
- Thanh khữ tĩnh điện
- Thanh khử ion tĩnh điện
- Bộ khử tĩnh điện
- Thanh khử ion tĩnh điện KASUGA DENKI
- Thanh khu tinh dien KASUGA DENKI
- Hệ thống khử tĩnh điện KASUGA DENKI
- Thanh thổi ion khử tĩnh điện KASUGA DENKI
Features
- AC-type units that eliminate static by generating ions
- The units apply the corona discharge method, which enables them to eliminate static without contacting the charged object.
- The static eliminating electrode features a completely new structure that uses a ceramic dielectric element for capacitive coupling.
- The static eliminating electrode uses chemical-resistant materials (such as toluene).
- The high-voltage power supply device comes with a built-in protective circuit that shuts down the device and signals an alarm with a lamp and buzzer when it detects abnormal discharge of the static eliminating electrode or the high-voltage line, or abnormality of output voltage.
- One high-voltage power supply device permits use of up to four static-eliminating electrodes and four branch connectors. The maximum length of the high-voltage cable is 31 meters including the electrode lead cable.
Model
PAS-701S, CSR, SD-4, CSR-150P, CSR-2000P, CSR-2050P, CSR-2600P
Specifications
High-voltage power supply device
| Model | PAS-701S |
|---|---|
| Rated output voltage | AC7kV (at rated load) |
| Load capacity | Maximum: Three CSR-2600P electrodes and high-voltage cable that is 31-m long Minimum: One CSR-150P electrode and high-voltage cable that is 6.5-m long |
| Output short-circuit current | 5.2mA |
| Protective circuit | A built-in alarm circuit that detects abnormal discharge and output voltage fluctuation |
| Input power | AC100V (tap changer for switching to 110V, 200V or 220V) |
| Frequency | 60 Hz (switched to 50 Hz internally) |
| Power consumption | Approx. 50VA |
| Operating environment | Temperature: 0°C-40°C, Humidity: 35%-75% RH (no condensation) |
| Insulation type | E |
| Installation location | To be installed in a non-hazardous location |
Static-eliminating electrode
| Model | CSR |
|---|---|
| Ion generation method | AC corona discharge |
| Applied voltage | AC7kV |
| Electrode length | 150 mm-2,600 mm (CSR-150P to CSR-2600P) Variable in steps of 50 mm within the above range. |
| Effective static elimination current | 0.4 μA/cm or above (at an installation distance of 20 mm and a charge potential of -5 kV) |
| Installation distance | 20 – 100mm (The distance must be within the above range and determined by measuring the potential after static elimination.) |
| Operating environment | Temperature: 0°C-40°C, Humidity: 35%-75% RH (no condensation) |
| Installation site | To be installed in a hazardous location |
Branch connector
| Model | SD-4 |
|---|---|
| Type | For two-way, three-way or four-way connection |
| Connection method | Metal connector |
| Applied voltage | AC7kV |
| Operating environment | Temperature: 0°C-40°C, Humidity: 35%-75% RH (no condensation) |
| Installation site | To be installed in a hazardous location |
Có thể bạn quan tâm
