Máy đo nồng độ bụi DURAG D-RC 120

Model: D-RC 120
Hãng sản xuất: DURAG,
Tình trạng: Còn hàng
Bảo hành: 12 tháng

Giá:Liên Hệ

The D-RC 120 is an automatic sampling device for gravimetric dust measurements to adjust or calibrate dust monitors for the measurement of dust in mg/m3.

The D-RC 120 extracts isokinetically a partial gas stream from the measuring gas duct whereas the extraction is controlled fully automatically. The partial gas stream is sucked through a filter in which the contained dust is deposited. The dust concentration is determined by weighing the filter before and after the extraction.

The design of the D-RC 120 meets the requirements of DIN EN 13284-1 and US-EPA Method 5.

Thang.Ld@doluongbaotri.com.vn 0936 983 953 Liên hệ mua hàng

Đặc tính kỹ thuật
Thông số kỹ thuật
Video
Phụ kiện

OVERVIEW

Portable system
Easy handling
Automatic isokinetic sampling
Suitable for in-stack and out-stack sampling
Highest measuring accuracy
Probe available in stainless steel and titanium
Compliant with EN 13284-1, VDI 2066, EN ISO 9096 and US-EPA Method 5

APPLICATIONS

Calibration of dust monitors in mg/m3 according to DIN EN 13284-1 and VDI 2066
Adjustment of dust monitors before performing QAL 2
Determination of dust concentration at stacks for internal quality control
Measurements at filter plants

THÔNG SỐ KỸ THUẬT

Sample gas type	Air, flue gas, non-flammable process gas
sample gas temperature	0 … 500 °C
Sample gas dust concentration	0.1 … 2000 mg/m3
Inner duct pressure	-200 … +20 hPa relative to ambient
Sample gas relative humidity	< 95% rel. humidity, noncondensing, optional measurement in saturated flue gas below the dew point
Sample gas flow velocity	2 … 39 m/s
Duct inner diameter	0.35 … 6 m