Bộ đo và hiển thị tốc độ vòng quay SHIMPO DT-5TS DT-5TL
- Máy đo tốc độ vòng quay SHIMPO
- Thiết bị đo tốc độ vòng quay SHIMPO
- May do toc do vong quay
- Thiet bi do toc do quay
- Máy đo tốc độ quay động cơ
- Máy đo tốc độ quay cánh quạt
- Máy đo tốc độ quay kiểu tiếp
- Máy đo tốc độ vòng quay
- Bộ hiển thị tốc độ vòng quay
- Bộ đo và hiển thị tốc độ vòng quay
- Bộ đo và giám sát tốc độ quay
DT-5TS/DT-5TL Series Low-Priced Tachometers
This is a new type of panel-mount meter equipped with dual sub-indicators, having excellent waterproof properties (equivalent to IP66) and simple setting features at a low price. It accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers (basic input: DT-5TS, differential input: DT-5TL). Provided with various functions including calibration, memory, and prescaling.
Features
Excellent waterproof properties (equivalent to IP66)
- Allows the device to be used in environments where a large quantity of water is used, such as places where pharmaceuticals or other products are manufactured.
Compatible with various input signals
- The tachometer accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers.
1. Basic input: for various sensors such as rotary encoders and magnetic sensors
2. Differential input: for input signals from line drivers for servo motors and other such devices
Provided with various functions including calibration, memory, and prescaling
Capable of accepting high-speed input at 100 kHz
Reduction of approximately 35% compared to our previous models
- The space-saving design, DIN W96 x H48 x D92 mm (panel inside 83 mm), allows combination with a compact machine without difficulty.
Measurement modes
|
||||||||
|
Specifications
format | DT-5TS/DT-5TL | ||
---|---|---|---|
action mode | Tachometer mode/Flowmeter mode | Transit time mode | Time width mode |
Display 1 | 0 to 999999 6 digits |
0:00: 00 ~ 9: 59: 59 (hour, minute, second, and decimal display) |
0: 00: 00 ~ 0: 59: 59 (hour, minute, second, decimal display) |
Part 2 | – | 0:00 to 999:99 (second: 1/100 second decimal display) |
|
With zero suppress | |||
Decimal point position | 10-1 ~ 10-5 | – | |
Display | Main display: Red 7-segment LED, character height 15 mm, 6 digits, sub-display (2 pieces): Green 7-segment LED, character height 6.5 mm, 6 digits + 6 digits-Displayable |
||
Input range | 0.0067Hz-100kHz | 10ms ~ 3600s | |
Measurement accuracy | ±0.008% ±1 digit | ±0.1% ±1 digit | |
filter | 100kHz, 30kHz, 10kHz, 0.02kHz can be switched by parameter. However, the magnetic sensor is only 10kHz and 0.02kHz, and the contact is only 0.02kHz. |
||
Display cycle | 0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 seconds (can be changed by parameter setting) |
Depends on input signal | |
Prescale function | Parameter setting method with front panel keys. Teaching of display values (matching) is also possible. |
– | |
Memory function | The maximum and minimum measured values are stored and displayed on the sub display with a green LED. | ||
Upper and lower limits | The upper and lower limits can be displayed on the sub display with a green LED. | ||
Auto zero function | 0.1 ~ 150 seconds | 0.1-3600 seconds | |
Prediction calculation | The displayed value is updated according to the elapsed time after the pulse stops. | – | |
Insulation resistance | 10 MΩ or more (at 500 VDC megger) | ||
Withstand voltage | AC1500V or more 1min | ||
Noise resistance | Power supply terminal Normal/common mode ±1500V | ||
Vibration resistance | Conforms to JIS C-0911 Vibration frequency 10-55Hz, Single amplitude 0.5mm, 10 minutes each in XYZ direction | ||
Ambient temperature | 0°C to 45°C (with no condensation) | ||
Ambient humidity | 35 to 85%RH (However, no condensation) | ||
Ambient atmosphere | No corrosive gas | ||
Protection function | Front panel IP66 (equivalent), rear terminal block IP20 | ||
Case material | ABS resin | ||
External dimensions | W96 x H48 x D92 mm (DIN) | ||
mass | 300g |