Thiết bị tốc độ vòng quay kiểu đèn chớp SHIMPO DT-331P
- Máy đo tốc độ vòng quay kiểu đèn chớp SHIMPO
- Thiết bị đo tốc độ vòng quay loại đèn chớp
- Thiết bị tốc độ động cơ bằng đèn chớp
- Thiết bị đo tốc độ quay cánh quạt bằng đèn chớp
DT-311P Versatile Digital Stroboscopes for Printing Machines
Easy-to-handle, environmentally-resistant digital stroboscopes dedicated for printing machines. Equipped with a rubber guard at the front to protect the stroboscope against shocks. The totally-enclosed drip-proof structure prevents water and dust from entering inside. It is possible to move a stop-motion image forward or backward while maintaining synchronization, in order to move the register mark or a picture to an easily visible location. A detachable connector cable is used for the power supply, which allows it to be easily repaired in the event of disconnection.
Features
Equipped with a rubber guard at the front
- The rubber guard protects the front of the stroboscope against shocks.
A totally-enclosed drip-proof structure to prevent water and dust from entering inside
It is possible to move a stop-motion image forward or backward while maintaining synchronization, in order to move the register mark or a picture to an easily visible location.
Because a detachable connector cable is used, it is possible to repair it on the spot in the event of disconnection.
| Measuring/flashing range | 60.0-3,000 rpm |
|---|
Specifications
| format | DT-311P | DT-315P | |
|---|---|---|---|
| Number of flashes (rpm) | 60.0 ~ 3000 rpm | ||
| Internal oscillation mode | Setting accuracy | ±0.1 rpm: 60.0 to 200.0 rpm ±0.2 rpm: 200.1 to 3000.0 rpm | |
| Jump function | Existence (the number of flashes is halved or doubled only while the dedicated switch is pressed) | ||
| Limit function | Existence (can be set at 1000-3000 rpm) | ||
| Integer function | Existence (display decimal number, do not set) | ||
| Memory function | Existence (memorizes the number of times the light is emitted when the power is turned off, and emits that number of times the next time the power is turned on) | ||
| External sync mode | input signal | H level: 2.5-12V L level: 0-0.4V Pulse width 50μsec or more Trigger on rising edge Input impedance Approx. 10kΩ |
|
| Speed measurement function | 60.0 ~ 3000 rpm | ||
| Delayed emission | 200-3000 rpm | ||
| Delay range | 0 ~ 359° 1° step | ||
| display | 5 digit red LED | ||
| Sync output signal | Voltage pulse output | ||
| Setting device | Jog shuttle switch, tact switch | ||
| Flash light source | Xenon lamp | ||
| Lamp input | MAX.10W | ||
| Power supply | AC100V±10% | Rechargeable (dedicated Ni-Cd battery) flashes continuously for about 1.5 hours, or the included AC adapter (2 hours quick charge) External power supply DC9-16V2A | |
| Luminous timer | Continuous, 1 to 99 minutes, AC adapter AC100V±10% | ||
| Power supply output for sensor | DC12V 40mA | ||
| Power cord | 5m | – | |
| Ambient temperature | 0-40°C | ||
| environment | Drip-proof specifications (equivalent to IP63) | ||
| mass | About 1.4kg | About 1.9kg | |
| accessories | Input/output signal meta computer | AC adapter and charger | |
