Thiết bị tốc độ động cơ bằng đèn chớp SHIMPO DT-315P
- Máy đo tốc độ vòng quay kiểu đèn chớp SHIMPO
- Thiết bị đo tốc độ vòng quay loại đèn chớp
- Thiết bị tốc độ động cơ bằng đèn chớp
- Thiết bị đo tốc độ quay cánh quạt bằng đèn chớp
DT-315P Rechargeable Digital Stroboscopes for Printing Machines
Easy-to-handle, environmentally-resistant digital stroboscopes dedicated for printing machines. Equipped with a rubber guard at the front to protect the stroboscope against shocks. The totally-enclosed drip-proof structure prevents water and dust from entering inside. It is possible to move a stop-motion image forward or backward while maintaining synchronization, in order to move the register mark or a picture to an easily visible location. A detachable connector cable is used for the power supply. Uses a dedicated rechargeable NiCd battery.
Features
Equipped with a rubber guard at the front
- The rubber guard protects the front of the stroboscope against shocks.
A totally-enclosed drip-proof structure to prevent water and dust from entering inside
It is possible to move a stop-motion image forward or backward while maintaining synchronization, in order to move the register mark or a picture to an easily visible location.
Because a detachable connector cable is used, it is possible to repair it on the spot in the event of disconnection.
| Measuring/flashing range | 60.0-3,000 rpm |
|---|
Specifications
| Flash range and accuracy (internal mode) | 60 to 3,000 FPM with + or – 0.01% accuracy |
| Flash range (external mode) | Synchronous: 60 to 3,000 FPM Delay mode: 200 to 3,000 FPM |
| External mode accuracy | Synchronous: + or – 0.01% plus or minus 1 digit Delay mode: + 0 to 0.2 milliseconds plus or minus 1 digit |
| Rate multiplier/divider (internal mode only) | Multiply-by-2 and divide-by-2 |
| Phase shift (internal mode) | Push buttons shift 360 degrees in 6 seconds |
| Phase shift (external mode) | 0 to 360 degrees phase shift in 1 degree increments |
| Time delay (external mode) | 0 to 300 milliseconds |
| Light source | 10W xenon flash tube |
| Flash duration | Approximately 30 microseconds |
| Power requirements | Internal rechargeable battery or 115V AC (with battery disconnected) |
| Dimensions | 6.22 x 5.11 x 10.20 (158 x 130 x 259 (H x W x D) |
| Weight | 6.15lb./2.79kg |
