Thiết bị hiệu chuẩn đa năng BEAMEX MC6

The Beamex MC6 is an advanced, high-accuracy field calibrator and communicator. It offers calibration capabilities for pressure, temperature and various electrical signals. The MC6 also contains a fieldbus communicator for HART, FOUNDATION Fieldbus and Profibus PA instruments.

Carry less

The MC6 is a truly multifunctional field calibrator. When going out in the field it is so much easier to carry one device with you, instead of carrying several separate devices. We think that carrying less is a better way.

Go paperless

The MC6 is also a documenting calibrator. When it is used in conjunction with Beamex calibration software (Beamex CMX or Beamex LOGiCAL) you will experience a fully paperless calibration process. With the MC6, there is no error prone writing of calibration results on paper, manual error calculation, or manually typing results into the software. We think that going paperless is a better way for you.

Features

• Usability: The MC6 is easy and fun to use. We added a large backlit 5.7-inch color touch screen that can be used with bare fingers, with gloved fingers or with a stylus. An intuitive user interface with multiple user interface languages is included. The connection diagrams guide you to make the correct connections. We even added multiple user interface modes for different use cases.
• Ready for the field: We made the MC6 feel at home in industrial field conditions. It is water and dust protected (IP65) and has a very robust design. Being small, light, and ergonomic it is easy and fun to carry.
• Unmatched accuracy: Being a high-end process calibrator, we of course made it very accurate. The measurement uncertainty is very small and 1 year stability is also specified. Please refer to the brochure for detailed specifications.
• Multi-bus field communicator: We added a multi-bus field communicator into the calibrator. It includes HART, FOUNDATION Fieldbus H1 and Profibus PA communication all in one device, so that you can choose the ones that you need. There’s no longer a reason to carry a separate communicator with you when you go to do calibration work.

User interface modes

A calibrator should have advanced functionality yet remain easy to use – that is a pretty challenging situation. As a solution for this, we created different user interface modes for different use cases. For example, if you only want to measure something quickly and easily, use the simple Meter mode. If you want to document your calibration, use the Documenting calibrator mode.

1. Meter

Meter mode is designed for the simple and easy measurement of signals. Oftentimes, you may need to measure something quickly and easily. Often a simple multi-meter is used for this purpose, as it is easy to use. Some multifunctional calibrators are too slow and difficult to use, so it is easier to just choose a simpler meter. Meter mode in MC6 is optimized for this type of simple metering.

2. Calibrator

Calibrator mode is designed for calibrating various process instruments. Oftentimes, you need to check and calibrate a certain process instrument/transmitter. Transmitters typically have an input and an output. So you either need to have two devices, or a device capable of doing two things simultaneously. Calibrator mode in MC6 is optimized for this type of use.

3. Documenting Calibrator

Documenting Calibrator mode, working together with calibration software, is designed for process instrument calibration and documentation of the results. In today’s process plant, calibrations often must be documented. Without a documenting calibrator, documentation must be done manually, which takes a lot of precious time and is prone to error. The documenting calibrator mode in MC6 is optimized for use as a documenting process calibrator.

4. Data logger

The data logger is designed for logging various measurement results. There is often a need to measure signals for certain periods and to save the results in a memory for later analysis. This may be related to troubleshooting, surveillance, or calibration. The data logger mode in MC6 is optimized for this type of use.

5. Communicator

Communicator Mode is designed to communicate with Fieldbus instruments. In today’s process plants, smart instrumentation is being used to an increasing degree. Therefore, engineers need to use communicators or configuration software. Most of this instrumentation is HART, FOUNDATION Fieldbus or Profibus PA. The communicator mode in MC6 is optimized for this communication.

6. Settings

The settings mode allows you to edit the calibrator’s various settings to fit your needs.

Integrity of calibration data

When you use the Beamex MC6 family calibrators together with Beamex CMX calibration management software, you have a solution that further lowers the risk of ALCOA violations by identifying those using offline mobile devices by their electronic signature and by protecting the offline data against tampering.

Advanced functionality – MC6 offers the following functions

Pressure measurement, Voltage measurement, Current measurement, Frequency measurement, Pulse counting, Switch state sensing, Built-in 24 VDC loop supply, Voltage generation, Current generation, Resistance measurement, RTD measurement, RTD simulation, TC measurement, TC simulation, Frequency generation, Pulse queue generation, HART Communicator, Foundation Fieldbus Communicator, Profibus PA Communicator

Thông số kỹ thuật

Состояние товара: Б/у
Country/Region of Manufacture: Finland
Brand: Beamex
MPN: MC6
Calibrator Type: Process Calibrator