Thiết bị đo tốc độ vòng quay loại đèn chớp SHIMPO DT-315N

Model: DT-315N
Hãng sản xuất: SHIMPO,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Máy đo tốc độ vòng quay kiểu đèn chớp SHIMPO
  • Thiết bị đo tốc độ vòng quay loại đèn chớp
  • Thiết bị tốc độ động cơ bằng đèn chớp
  • Thiết bị đo tốc độ quay cánh quạt bằng đèn chớp

DT-315N Digital Stroboscopes with a Built-in Rechargeable Battery

The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source. Power is provided by a dedicated rechargeable NiCd battery.

Features

A wide measuring range

  • The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.

Provided with a phase adjustment function

  • It is possible to move an image while maintaining synchronization.

The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.

Provided with a memory function

  • The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
Measuring/flashing range 40.0-35,000 rpm (0-35,000 in the external synchronization mode)

Thông số kỹ thuật

format DT-311N DT-315N
Number of flashes (rpm) 40.0 to 35000 0 to 35000 in external synchronization mode
Internal oscillation
mode
Display decomposition function 0.1: 40.0 to 5000
0.2: to 8000
0.5: to 10000
1: 1 to 35000
Jump function Existence (when the dedicated switch is pressed, the number of flashes is halved or doubled)
Integer function Existence (display decimal number, do not set)       
Memory function Existence (memorizes the number of times the light is emitted when the power is turned off, and emits that number of times the next time the power is turned on)
External sync
mode
input signal Voltage input H level: 2.5V to 12V
L level: 0.8V MAX
pulse width 50μs or more
Input impedance 10kΩ or more
Speed ​​measurement function 40.0-35000rpm (Ineffective during delayed flash)
Delayed emission Delay angle can be set every 0 to 359° 1° in the range of 40.0 to 10000 rpm, or
delay time can be set every 0 to 2000ms 1ms
display 5 digit red LED 7 segment
Sync output signal 12V voltage signal, pulse width approx. 400 μs
Setting device Multi-turn encoder, tact switch
Flash light source Xenon lamp
Lamp input 10W
Power supply AC100-120V Rechargeable (dedicated Ni-Cd battery)
emits light for about 1 hour continuously, or
included AC adapter g (quick charge for 2 hours)
AC100V±10%
Luminous timer Continuous lighting or stop emitting light after a set time of 1 to 120 minutes
Power supply output for sensor DC12V 40mA
Power cord 2.4m
Operating temperature 0-40°C
mass 1.2 kg 2.1 kg
accessories Pistol grip Dedicated adapter