Thiết bị đo lưu lượng bằng siêu âm XMT868i

Model: XMT868i
Tình trạng: Còn hàng
Bảo hành: 12 tháng

Giá:Liên Hệ

Máy đo lưu lượng nước bằng siêu âm GE PANAMETRICS
Máy đo lưu lượng nước thải bằng siêu âm GE PANAMETRICS
Máy đo lưu lượng khí bằng siêu âm GE PANAMETRICS
Máy siêu âm đo lưu lượng GE PANAMETRICS
Hệ thống đo lưu lượng nước bằng siêu âm GE PANAMETRICS
Đồng hồ đo lưu lượng GE PANAMETRICS

Thang.Ld@doluongbaotri.com.vn 0936 983 953 Liên hệ mua hàng

Đặc tính kỹ thuật
Thông số kỹ thuật
Video
Phụ kiện

Mô tả sản phẩm

The XMT868i liquid flow transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that measures only 8.2 by 6.6 in (20.1 by 16.8 cm), weighs only 10 lb (4.5 kg) and can be installed right at the process measurement point. The all-digital XMT868i has no moving parts and provides long-term, drift-free operation. An on-board microprocessor provides exclusive digital signal coding and correlation detection routines, automatic adjustment to changing fluid properties, dynamically configured operating software to simplify programming and built-in energy flow measurement.

Features

Low range: -40 to 40 ft/s (-12.2 to 12.2 m/s)
Pipe sizes ½ to 200 in (1.27 cm to 5.1 m)
Single- and dual-channel modes
RTDs for energy flow measurements (optional)
Data logging capabilities (optional)
Weatherproof/explosion-proof housing

Thông số kỹ thuật

Fluid Types	Acoustically conductive fluids, including most clean liquids, and many liquids with entrained solids or gas bubbles. Maximum void fraction depends on transducer, interrogation carrier frequency, path length and pipe configuration.
Pipe Sizes	– Clamp-on transducers: 0.5 in to 300 in (12.7 mm to 7.6 m) and larger – Wetted transducers: 1 in to 200 in (25.4 mm to 5 m) and larger
Pipe Wall Thickness	All metals and most plastics. Consult RS Hydro for concrete, composite materials, and highly corroded or lined pipes.
Flow Accuracy (Velocity)	±0.5% of reading (achievable with process calibration)
Typical Clamp-On Flow Accuracy (Velocity)	– Pipe ID>6 in (150 mm): ±1% to 2% of reading – Pipe ID<6 in (150 mm): ±2% to 5% of reading
Typical Wetted Flow Accuracy (Velocity)	±1% of reading Accuracy depends on pipe size, installation and whether measurement is one-path or two-path.
Repeatability	±0.1% to 0.3% of reading
Range (Bidirectional)	-40 to 40 ft/s (-12.2 to 12.2 m/s)
Rangeability (Overall)	400:1