Thiết bị đo lực kéo nén để bàn SHIMPO FGS-VC
Giá:Liên Hệ
- Thiết bị đo lực kéo nén cầm tay SHIMPO
- Máy đo lực kéo nén cầm tay
- May do luc keo nen SHIMPO
- Lực kế điện tử
- Máy đo lực kéo nén hiển thị cơ
- Máy đo lực kéo nén chỉ thị kim
- Đồng hồ đo lực kéo nén
- Bộ gá thiết bị đo lực kéo nén SHIMPO
- Máy đo lực kéo nén vải
- Máy đo lực kéo nén giấy bìa carton
- Máy đo lực kéo nén sợi chỉ
- Máy đo độ bền kéo nén thực phẩm
- Máy đo độ bền kéo nén bao bì
FGS-VC Series – Motorized Test Stands for Force Gauges (Vertical Type)
By changing digital force gauges (push-pull gauges), loads ranging from 2 N to 2,500 N can be measured with this force gauge stand. The USB interface and specialized FGT-VC add-in software, which is available free of charge, allow the stand carriage moving distance and load data to be easily transferred to a computer and displayed as a graph.
Features
A wider range of loads
- Loads ranging from 2 to 2,500 N (0.2-250 kg) can be measured. Various types of digital force gauges can be mounted.
- Note: Digital force gauges are sold separately.
(Digital force gauges other than the FGP Series listed above can be mounted as well. However, please note that separate adapter plates are required to mount them.)
Longer stroke
- The mounted force gauge can be moved by up to 400 mm to perform various types of tests.
Wider speed range
- The wide travel speed range (10-400 mm/min) allows the force gauge to respond to various test conditions.
Easy to use
- Uses an LCD on the operation panel
- Key switch layout for easy operation
- For switching operation modes
- For setting travel speed
- For displaying distance and travel speed
Specifications
form | FGS-100VC | FGS-250VC | |
---|---|---|---|
Measured load | 1000N(100kgf) | 2500N(250kgf) | |
Load capacity | 1000N(100kgf) | 2500N(250kgf) | |
Feed rate | 10-400mm/min Operation panel, speed setting |
||
stroke | 400mm | ||
Display Department | Dot matrix LCD 4 digits with sign | ||
Express | Movement speed indication | 10 ~ 400mm / min | |
Movement distance indication | 0.0~400.0mm | ||
Repeat count display | 0 ~ 9999 | ||
action mode | MANU mode: Move to dog / JOG mode: Jog operation / SING mode: Move once between dogs CONT mode: Repeated move between dogs / PROG mode: Move 5 points |
||
communication | USB | USB (for PC) | |
input | Overload input | Stop at FGPX(FGP) overload signal | |
Measurement table | 150 × 200mm | ||
Operating temperature limit | 0 to 45°C (no condensation) | ||
power supply | AC100V ± 10 % | ||
quality | About 63kg | About 65kg | |
accessories | Power supply AC socket for force gauge, FGXX (FGP) connection cable, USB cable | ||
PC software | Free offer Download from Sympo HP | ||
Sends load and distance data and displays a graph with trigger function (starts data acquisition after reaching the set load) Continuous data acquisition frequency can be set / with upper/lower limit judgment function |
|||
Other | Emergency stop switch | ||
Corresponding force gauge | FGP-0.2~50,100 | FGP-0.2~50,100 | |
FGPX-0.2~50,100 | FGPX-0.2~50,100 | ||
FGPX-250H |