Ống dẫn thủy lực SKF 227957 227958 1020612 A
Model: 227957 A/400MP, 227958 A/400MP, 1020612 A
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
- Bơm thủy lực SKF
- Bơm thủy lực
- Bộ dụng cụ tháo lắp khớp nối thủy lực
- Bộ chân đế bơm thủy lực
- Bộ bơm dầu thủy lực SKF
- Đồng hồ đo áp suất SKF
- Ống dẫn thủy lực SKF
Flexible solutions to connect oil injection equipment
SKF High-pressure pipes can be used when SKF Oil injection equipment cannot be connected directly to a pressure joint. Typically they are used for non bearing applications where the oil injection pressure is in excess of 150 MPa (21 750psi). They consist of a steel pipe with a steel ball fitted to both ends. Two swivelling connection nipples press these balls against the seating of the connecting hole and thus sealing against oil leakage.
FIND A DISTRIBUTOR
- Flexible connection to non-bearing applications such as gear wheels, railway wheels and couplings.
- All pipes are pressure tested during production
- Special lengths up to 4 000 mm (157 in.) can be made on request *
- Safety note
For safety reasons, these high–pressure pipes have a maximum service life. All SKF High-pressure pipes are hard–marked with the year in which their service life expires e.g. Do no use after 2023.
High pressure pipes are marked with their maximum working pressure of max 400 MPa (58 000psi)
Thông số kỹ thuật
Maximum working pressure | 400 MPa (58 000psi) |
Test quantity | 100% |
Outer pipe diameter | 6 mm (0.24 in.) |
Inner pipe diameter | 1,6 mm (0.06 in.) |
Pipe minimum bending radius | 100 mm (4 in.) |
Pipe lengths | See table below for standard lengths (L). Lengths between 1000 mm (39 in.) and 4 000 mm (118 in.) can be made on request |