Máy đo độ tĩnh điện 2 kênh KASUGA KSD-0120

    Model: KSD-0120, KS-2100
    Hãng sản xuất: KASUGA DENKI,
    Tình trạng: Còn hàng
    Bảo hành: 12 tháng
    Giá:Liên Hệ
    • Máy đo độ tĩnh điện KASUGA DENKI
    • Thiết bị đo độ tĩnh điện KASUGA DENKI
    • Máy giám sát độ tĩnh điện KASUGA DENKI
    • Máy thử độ tĩnh điện KASUGA DENKI
    • Bộ thiếr bị đo độ tĩnh điện KASUGA DENKI
    • Máy đo và phân tích độ tĩnh điện KASUGA DENKI
    • Cảm biến đo độ tĩnh điện KASUGA DENKI

    Features

    • This single unit can be connected with wide potential sensors (KS-2100) via up to two channels, allowing building of a static monitoring system at low cost.
    • Since the sensor is small, it can be installed in a narrow space inside a manufacturing device for continuous monitoring.
    • Permits alarm setting, which means it can be interlocked with all types of manufacturing devices so that alarm signals are transmitted to the device when the set value is exceeded.
    • Comes equipped with a newly developed circuit for failure diagnosis of the surface potential sensor, meaning it quickly detects failure of the sensor due to shock, etc. and outputs signals indicating the failure to an external device.
    • Can also be used to check the effectiveness of an ionizer or for its management.
    • Permits switching between ranges, allowing measurement over a wide range from low potential to high potential.

    Specifications

    Main unit

    Model KSD-0120
    Display range Range 1: ±1 – ±1999V
    Range 2: ±0.01 – ±19.99kV
    Analog output 0 – ±5V
    Control setting Independent settings of two channels
    Control output Open collector (control setting output and sensor failure output)
    Power supply DC12-24V or dedicated AC adapter (AC100V, optional)
    Consumption current 500mA(DC12 – 24V)
    Operating environment Temperature: 0°C-40°C,Humidity: 65% RH or below (no condensation)
    Mass Approx. 580 g (including attachment bracket)

    Dedicated AC adapter(Options)

    Model AC adapter for KSD-0120
    Input conditions AC100V 50/60Hz
    Output voltage DC12V
    Cable length 1580mm
    Mass Approx. 385 g

    Sensor (optional)

    Model KS-2100
    Detection method Vibration-type static sensor
    Measuring ranges Range 1: ±1 – ±2000V
    Range 2: ±0.01 – ±20.00kV
    Analog output 0 – ±5V
    Measurement precision Within ±10%
    Standard measurement distance Range 1: 10 mm
    Range 2: 50 mm
    Alarm LED lamp indication and external output of sensor failure
    Power supply Supplied by KSD-0120
    Operating environment Temperature: 0°C-40°C,Humidity: 65% RH or below (no condensation)
    Mass Approx. 100 g (not including cable)
    Accessories Dedicated 5 m cable (can be extended to 100 m)