Mẫu chuẩn độ dày máy siêu âm NOVOTEST
Giá:Liên Hệ
Set of KUSOT-180 ultrasonic thickness calibration blocks is intended for examination and for initial inspection at manufacturing of ultrasonic contact thickness gauges.
KUSOT-180 сalibration blocks are also used for verification, calibration and metrological certification of ultrasonic thickness gauges.
KUSOT-180 сalibration blocks are used in the following ranges:
- 0,2-300 mm on steel
- 1-300 mm on duralumin
- 1-100 mm on brass
The kit consists of the thickness samples, combined in sets and packed in a case.
Step-calibration blocks (Step wedge calibration blocks) are used for adjustment and calibration of ultrasonic thickness gauges.
Linear dimensions of Step wedge calibration blocks are individually available by a customer request and according to the acting regulatory and technical documentation.
| No. of set | Name of set | Material | Nominal thickness values |
| No.1 | Standard set of plane-parallel thickness blocks | Alloy D16 | 1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 12; 15; 18; 20; 25; 30; 35; 40; 45; 50; 75; 90; 100. |
| No.2 | Standard set of plane-parallel thickness blocks | Steel 40H13 | 1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 12; 15; 18; 20; 25; 30; 35; 40; 45; 50; 75; 90; 100. |
| No.3 | Standard set of plane-parallel thickness blocks | Steel 40H13 Alloy D16 |
200; 300; 200; 300. |
