Cảo thủy lực tháo vòng bi SKF TMHS 75 TMHS 100
Model: TMHS 75, TMHS 100, TMHS 5T, TMHS 8T, TMHS 100-1
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
- Cảo thủy lực tháo vòng bi SKF
- Cảo thủy lực tháo lắp vòng bi
- Dụng cụ tháo lắp vòng bi
- Bộ dụng cụ đóng vòng bi
- Cảo 3 chấu tháo lắp vòng bi
- Cảo vòng bi trong
- Cảo vòng bi ổ kín
- Bộ dung cụ tháo vòng bi
Effortless withdrawal force generation
The SKF advanced hydraulic spindles TMHS 75 and TMHS 100 generate a high pulling force with very little effort compared to the standard mechanical spindles. They dramatically reduce the time needed to dismount a bearing or other component. The spindles are equipped with integrated hydraulic pumps for force generation. Maximum pulling forces are limited by special safety valves and the hydraulic oil will remain inside the pump.
- Integrated hydraulic cylinder, pump and spindle – no separate pump is required
- Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied
- Spring-loaded centre point in the nosepiece allows easy centring of the puller on the shaft without damaging shaft centre point
- Hand lever with ergonomic grip can be rotated 360°
- Hardened and chrome plated piston with spring return function
- Extension pieces included allows easy adaptation for the required pulling length
FIND A DISTRIBUTOR
TMHS 75
- The TMHS 75 has a maximum withdrawal force of 75 kN (8.4 ton (US)) and a long stroke length of 75 mm (3.0 in), which allows dismounting in one operation
- Suitable for use with any puller equipped with a UN 1¼” × 12 tpi threading that can be used up to the maximum force of 75 kN (8.4 ton (US))
- Delivered with a 50 (2.0 in) and 100 mm (3.9 in) extension piece
TMHS 100
- The TMHS 100 has a maximum withdrawal force of 100 kN (11.2 ton (US)) and a long stroke of 80 mm (3.1 in), which allows dismounting in one operation
- Suitable for use with any puller equipped with a UN 1½” × 16 tpi threading that can be used up to the maximum force of 100 kN (11.2 ton (US))
- Delivered with a 50 (2.0 in), 100 mm (3.9 in) and 150 mm (5.9 in) extension piece
Thông số kỹ thuật
| Designation | TMHS 75 | TMHS 100 |
| Contents | 1 × hydraulic spindle | 1 × hydraulic spindle |
| 2 × extension pieces; 50 and 100 mm (2.0 and 3.9 in.) | 3 × extension pieces; 50, 100 and 150 mm (2.0, 3.9 and 5.9 in.) | |
| 1 × nosepiece | 1 × nosepiece | |
| Maximum withdrawal force | 75 kN (8,4 ton US) | 100 kN (11.2 ton US) |
| Piston stroke | 75 mm (3.0 in.) | 80 mm (3.1 in.) |
| Body thread | UN 11/4 × 12 | UN 11/2 × 16 |
| Nose piece diameter | 35 mm (1.4 in.) | 30 mm (1.2 in.) |
| Maximum reach | 229 mm (9.0 in.) | 390 mm (15.4 in.) |
| Weight | 2,7 kg (6.0 lb) | 4,5 kg (10.0 lb) |
Có thể bạn quan tâm
