Cảo tháo vòng bi SKF TMMD 100
Giá:Liên Hệ
- Cảo thủy lực tháo vòng bi SKF
- Cảo thủy lực tháo lắp vòng bi
- Dụng cụ tháo lắp vòng bi
- Bộ dụng cụ đóng vòng bi
- Cảo 3 chấu tháo lắp vòng bi
- Cảo vòng bi trong
- Cảo vòng bi ổ kín
- Bộ dung cụ tháo vòng bi
Easy dismounting of bearings in blind housings
The puller is suitable for use in both blind housings and shaft applications. The SKF TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaft diameters ranging between 10 and 100 mm (0.4–3.9 in.).
FIND A DISTRIBUTOR
- The claws are designed to precisely fit in the bearing’s raceway, providing a good grip, thereby allowing high dismounting forces
- Each puller arm is fitted with a spring for easy installation
- The claw has been designed to allow easy insertion
- The hexagon head of the spindle is designed to prevent the spanner sliding down the spindle during dismounting
- The puller can also be used to remove sealed bearings from blind housings, after the seal has been removed
- Supplied in a sturdy carrying case
Thông số kỹ thuật
| Designation |
TMMD 100 |
| Kit contents | 3 x puller arm A1–135 mm (5.3 in.) |
| 3 x puller arm A2–135 mm (5.3 in.) | |
| 3 x puller arm A3–137 mm (5.4 in.) | |
| 3 x puller arm A4–162 mm (6.4 in.) | |
| 3 x puller arm A5–167 mm (6.6 in.) | |
| 3 x puller arm A6–170 mm (6.7 in.) | |
| 2 x spindle and nut | |
| 1 x handle | |
| Effective arm length | 135–170 mm (5.3–5.7 in.) |
| Dimensions of case | 530 x 85 x 180 mm (20.9 x 3.4 x 7.0 in.) |
| Weight | 3,6 kg (7.9 lb) |
