Cảm biến đo độ rung SKF CMSS 2200 CMSS 2200-M8

Model: CMSS 2200, CMSS 2200-M8, CMSS 932-68LC, CMSS 932-68TL, CMSS 932-SY-XXM, CMSS 932-DY-XXM, MIL-C-5015
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Cảm biến đo độ rung SKF
  • Bộ đo và giám sát rung
  • Cảm biến đo rung động SKF
  • Cảm biến đo độ rung phòng nổ
  • Cảm biến đo độ rung kết hợp đo nhiệt độ bề mặt
  • Cảm biến đo độ rung động cơ
  • Cảm biến đo độ rung hộp số
  • Cảm biến giám sát rung động SKF
  • Cảm biến đo độ rung môi trường công nghiệp nặng
  • Đầu đo độ rung
  • Đầu cảm biến đo độ rung

Features

• For use with all SKF on-line systems, protection systems and the portable data collection instruments
• Rugged, economical and all around general purpose sensor
• 100 mV/g sensitivity to optimize use in multiple applications
• Exceptional bias voltage (BV) stability at elevated temperatures
• Designed for exceptional low noise level over a wide temperature range
• Meets CE, EMC requirements
• Captive mounting bolts (1/4-28 and M6 x 1,00) provided
• Corrosion resistant and hermetically sealed for installation in high humidity areas
• Reverse polarity wiring protection

Cảm biến đo độ rung SKF CMSS 2200 CMSS 2200-M8

Speciications

Speciications conform to ISA-RP-37 2 (1-64) and are typical values referenced at 24 °C (75 °F), 24 V DC supply, 4 mA constant current and 100 Hz

Dynamic

• Sensitivity: 100 mV/g
• Sensitivity precision: ±5% at 24 °C (75 °F)
• Acceleration range: 80 g peak
• Amplitude linearity: 1%
• Frequency range:
– ±10%: 1,0 to 5 000 Hz
– ±3 dB: 0,7 to 10 000 Hz
• Resonance frequency, mounted, nominal: 22 kHz
• Transverse sensitivity: ≤ 5% of axial
• Temperature response: See graph

Environmental

• Temperature range: –50 to +120 °C (–60 to +250 °F) operating temperature
• Vibration limit: 500 g peak
• Shock limit: 5 000 g
• Electromagnetic sensitivity, equivalent g, maximum: 30 µg/gauss
• Sealing: Hermetic
• Base strain sensitivity: 0,002 g/µstrain
• CE: According to the generic immunity standard for Industrial Environment EN 50082-2
– Acceptance criteria: The generated “false equivalent g level” under the above test conditions should be less than 2 mg measured peak to peak

Physical

• Dimensions: See drawing
• Weight: 135 g (4.8 oz.)
• Case material: 316L stainless steel
• Mounting: 1/4-28 and M6 x 1 captive socket head screw
• Mounting torque: 2,9 Nm (24 in lbs )
• Connections:
– Shell: Ground
– Pin A: Power/Signal
– Pin B: Common
• Mating connector: CMSS 932-68LC or CMSS 932-68TL, two pin,
IP 68, locking collar or twist lock
• Recommended cable: CMSS 932-SY-XXM and CMSS
932-DY-XXM, two conductor, twisted pair, single shielded, yellow