Bơm thủy lực 100MPa SKF 729124
Giá:Liên Hệ
- Bơm thủy lực SKF
- Bơm thủy lực
- Bộ dụng cụ tháo lắp khớp nối thủy lực
- Bộ chân đế bơm thủy lực
- Bộ bơm dầu thủy lực SKF
- Đồng hồ đo áp suất SKF
- Ống dẫn thủy lực SKF
100 MPa – (14 500 psi)
The 729124 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 54E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14 500 psi) is required. The pump is supplied with 1 500 mm (59 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF Mounting fluid LHMF 300 and is supplied with an extra litre of fluid.
Special execution 729124DU
729124 including THGD 100 digital pressure gauge for use with the SKF Drive-up Method.
FIND A DISTRIBUTOR
Features & benefits
- Oil container capacity 250 cm³ (15 in.³)
- Fitted with a pressure gauge
- Packed in a sturdy protective case
Applications
- SKF hydraulic nuts smaller than or equal to HMV 54E
- Oil injection applications where the maximum pressure is 100 MPa (14 500 psi)
- For applications where space does not permit the use of a quick connect coupling and nipple, such as AOH sleeves, a special pump design that direct screws into a G1/4 fitting is available. (SKF 729124 A)
Thông số kỹ thuật
| Designations | 729124 |
| 729124 A | |
| Maximum pressure | 100 MPa (14 500 psi) |
| Volume/stroke | 0,5 cm3 (0.03 in.3) |
| Oil container capacity | 250 cm3 (15 in.3) |
| Length of pressure hose | 1 500 mm (59 in.) |
| Connection nipple | G1/4 quick connection |
| Weight | 3,5 kg (8 lb) |
| Designation | 729124 DU |
| 729124 including THGD 100 |
