Bơm mỡ tự động SKF TLMR

Model: TLMR
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ

The SKF Automatic Lubricant Dispenser is a single point automatic lubricator designed to supply grease to a single lubrication point. With a relatively high pressure of 30 bars, this lubricator can operate at long distances providing optimum results with difficult-to-reach and unsafe lubrication locations. With a wide temperature range and robust design, the TLMR lubricator is suitable for operating conditions with various levels of temperature and vibration.

  • Filled with high quality SKF greases
  • Temperature independent dispense rate
  • Maximum discharge pressure of 30 bar over the whole dispensing period
  • Dispense rate available in various settings
  • Available in two versions: TLMR 101 powered by batteries (standard Lithium AA type) and TLMR 201 powered by 12-24 volt DC
  • Available with non-refillable cartridges in two sizes: 120ml and 380ml
  • Easy to install and use
  • High water and dust protection (IP=67)
  • Extensive range of accessories
Technical data
Grease capacity 120 120 ml (4.1 fl. oz US)
380 380 ml (12.8 fl. oz US)
Emptying time User adjustable: 1,2,3,6,9,12, 18,  24 months or purge
Lowest setting 120 0,16 ml per day (0.005fl. oz US)
380 0,5 ml per day (0.016 fl. oz US)
Highest setting 120 3,9 ml per day (0.13 fl. oz US)
380 12,5 ml per day (0.42 fl. oz US)
Purge 31 ml per hour (1 fl. oz US)
Ambient temperature range -25°C to 70 °C (-13 °F to 158 °F)
Maximum operating pressure 30 bar (435 psi)
Drive mechanism Electro mechanical
Connection thread Female G 1/4
Maximum feed line length Up to 5 meters (16 ft) *
LED status indicators OK (every 8 seconds green)
Almost empty (every 8 seconds green and red)
Error (every 8 seconds red)
Protection class DIN EN 60529 IP67
Protection class DIN 40 050 Teil 9 IP 6k9k
Battery TLMR 101 4 AA Lithium batteries
Power TLMR 201 12-24 Volt DC
Dimensions Coming from IFU
Disposal
Industrial waste EU code
Canister 15 01 10
Battery pack 16 06 05
* The maximum feed line length is dependent on ambient temperature, grease type and back pressure created by the application.