| Designation | TMFT 24 | |
| Impact ring | Bore diameter | 15–45 mm (0.59–1.77 in.) |
| Outer diameter | 32–100 mm (1.26–3.94 in.) | |
| Sleeves | Maximum shaft length | Sleeve A: 220 mm (8.7 in.) |
| Sleeve B: 220 mm (8.7 in.) | ||
| Sleeve C: 225 mm (8.9 in.) | ||
| Hammer | TMFT 36-H, weight 0,9 kg (2.0 lb) | |
| Carrying case dimensions | 530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.) | |
| Number of rings | 24 | |
| Number of sleeves | 3 | |
| Weight (including carrying case) | 4,0 kg (8.9 lb) |
Bộ dụng cụ đóng vòng bi SKF TMFT 24 TMFT 36
Giá:Liên Hệ
- Cảo thủy lực tháo vòng bi SKF
- Cảo thủy lực tháo lắp vòng bi
- Dụng cụ tháo lắp vòng bi
- Bộ dụng cụ đóng vòng bi
- Cảo 3 chấu tháo lắp vòng bi
- Cảo vòng bi trong
- Cảo vòng bi ổ kín
- Bộ dung cụ tháo vòng bi
Helps prevent premature bearing failures
Poor fitting, usually using brute force, accounts for 16% of premature bearing failures. SKF Bearing Fitting Tool Kits are designed for quick and precise mounting of bearings, while minimising the risk of bearing damage.
The right combination of impact ring and sleeve allows effective transmission of mounting force to the bearing ring with the interference fit. This minimises the risk of damaging the bearing’s raceways or rolling elements. In addition to mounting bearings, the TMFT series are also suitable for mounting other components such as bushings, seals and pulleys.
The TMFT 36 kit contains 36 impact rings and the TMFT 24 contains 24 rings. Both kits have 3 impact sleeves and a dead-blow hammer packed in a lightweight carrying case.
FIND A DISTRIBUTOR
- The TMFT 36 facilitates the mounting of a wide range of bearings with bore diameters from 10–55 mm
- The TMFT 24 facilitates the mounting of a wide range of bearings with bore diameters from 15–45 mm
- Facilitates correct mounting on shaft, housing and blind applications
- The diameter of the impact ring precisely fits the inner and outer diameter of the bearing
- Small diameter of the impact area on top of the sleeve allows effective transmission and distribution of mounting force
- Impact rings and sleeves are made of high impact resistant material for longevity
- Click connection between impact ring and sleeve provides stability and durability
- The impact rings are suitable for use under a press
- Impact rings are marked for clear visual identification of the ring’s size and easy selection
- Even surface of the impact sleeve’s body provides excellent grip
- The nylon double-side head of the dead-blow hammer helps to prevent damaging the components
- The ergonomic hand grip of the dead-blow hammer provides excellent grip
| Designation | TMFT 36 | |
| Impact ring | Bore diameter | 10–55 mm (0.39–2.17 in.) |
| Outer diameter | 26–120 mm (1.02–4.72 in.) | |
| Sleeves | Maximum shaft length | Sleeve A: 220 mm (8.7 in.) |
| Sleeve B: 220 mm (8.7 in.) | ||
| Sleeve C: 225 mm (8.9 in.) | ||
| Hammer | TMFT 36-H, weight 0,9 kg (2.0 lb) | |
| Carrying case dimensions | 530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.) | |
| Number of rings | 36 | |
| Number of sleeves | 3 | |
| Weight (including carrying case) | 4,4 kg (9.7 lb) |
Có thể bạn quan tâm
