Bộ đánh lửa Plasma DURAG HEGWEIN PLASMA IGNITION SYSTEM
Giá:Liên Hệ
- Safe ignition of different gaseous, liquid and solid fuels
- Familiar high reliability
- High ignition potential: high temperature with high energy density in the ignition volume
- No fuel and no combustion air required
- Creation of plasma with variable carrier media possible (e.g. air)
- Easy and simple integration in superordinate control Systems
- Low requirement for maintenance
- Few connections and interfaces required
APPLICATIONS
The Plasma Ignition System is usable for ignition of difficult to be ignited fuels like pulverized solid fuels (pre-dried lignite (PDL), hard coal and biomass) as well as gases, oils and special fuels. Additionally the igntion in low-oxygen or oxygen-free atmospheres is possible.
The firing systems can be found in the following areas:
- Fossil-fired power plants (lignite, hard coal, biomass, oil and gas)
- Thermal process utilities (industrial ovens)
- Chemical palnts
- Timber industry
- Waste incinerators
- Petrochemical industry
- Iron and steel industry
THÔNG SỐ KỸ THUẬT
| 1 kW | 3 kW | |
|---|---|---|
| Plasma Jet length (typical) | 100 mm | 150 mm |
| Plasma temperature | approx. 3500 °C | approx. 3500 °C |
| Lance diameter | 28 mm | 35 mm |
| Protection class | IP 65 | IP 65 |
| Ambient temperature lance head | 0 °C … 60 °C | 0 °C … 60 °C |
| Operational temperature plasma lance (continuously) | 180 °C | 180 °C |
| Operational temperature tip of lance (max. 2 min. without additional air or water cooling) | max. 1100 °C | max. 1100 °C |
| Material | Stainless steel | Stainless steel |
| Length of lance | max. 3 m | max. 5 m |
| Power supply | 230 VAC | 400 VAC |
| Carrier medium | e.g. compressed air | e.g. compressed air |
