Bộ cảo vòng bi trong SKF TMIC 7-28 TMIP 7-28 TMIP 30-60
Giá:Liên Hệ
- Cảo thủy lực tháo vòng bi SKF
- Cảo thủy lực tháo lắp vòng bi
- Dụng cụ tháo lắp vòng bi
- Bộ dụng cụ đóng vòng bi
- Cảo 3 chấu tháo lắp vòng bi
- Cảo vòng bi trong
- Cảo vòng bi ổ kín
- Bộ dung cụ tháo vòng bi
Fast and easy bearing dismounting from housings
The SKF Internal bearing puller kits are designed for dismounting bearings from housings, where the fit is on the outer ring. The pullers are constructed for optimum strength and durability and suit a wide range of bearing bore diameters. A sliding hammer allows high impact forces to be applied and is ergonomically designed to enhance user safety.
FIND A DISTRIBUTOR
TMIC series
- Expandable collet design made of high strength materials
- Designed for applications with only a limited space to grip behind the bearing
- Suit bearing bores between 7-28 mm
- Supplied in a sturdy carrying case
TMIP series
- Special design can reduce dismounting time
- Unlike most internal bearing pullers, the spring loaded extractors can be quickly and easily fitted to the inner ring in just one quick action.
- Claw design provides a strong and secure grip behind the inner ring, allowing a high puller force to be applied
- Two different kits to suit bearing bores between 7-28 mm and 30-60 mm
- Supplied in a sturdy carrying case
Thông số kỹ thuật
| Designation | TMIC 7-28 |
| Bearing bore diameter | 7–28 mm (0.28–1.1 in.) |
| Carrying case dimensions (l x w x h) | 530 x 85 x 180 mm (20.9 x 3.4 x 7.0 in.) |
| Weight | 3,0 kg (6.6 lb) |
| Designation | TMIP 7–28 |
| Bearing bore diameter | 7–28 mm (0.28–1.1 in.) |
| Carrying case dimensions (l x w x h) | 530 x 85 x 180 mm (20.9 x 3.4 x 7.0 in.) |
| Weight | 3,1 kg (6.8 lb) |
| Designation | TMIP 30–60 |
| Bearing bore diameter | 30–60 mm (1.2–2.4 in.) |
| Carrying case dimensions (l x w x h) | 530 x 85 x 180 mm (20.9 x 3.4 x 7.0 in.) |
| Weight | 5,4 kg (11.9 lb) |
