Bộ cảo thủy lực tháo lắp vòng bi SKF TMHP 10E

Model: TMHP 10E, TMHS 100, TMHS 100-1, TMHS 8T, TMHP 10E-5, TMHP 10E-10, TMHP 10E-11, TMHP 10E-12
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Cảo thủy lực tháo vòng bi SKF
  • Cảo thủy lực tháo lắp vòng bi
  • Dụng cụ tháo lắp vòng bi
  • Bộ dụng cụ đóng vòng bi
  • Cảo 3 chấu tháo lắp vòng bi
  • Cảo vòng bi trong
  • Cảo vòng bi ổ kín
  • Bộ dung cụ tháo vòng bi

Effortless bearing dismounting up to 100 Kn

The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.


  • High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs
  • The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.9 in), make the TMHP 10E suitable for use in a wide range of applications
  • The self-locking arms minimise the risk of the puller slipping from the application when under load
  • Hydraulic spindle facilitates effortless dismounting
  • The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
  • Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
  • Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
  • The spring-loaded centre point of the hydraulic spindle allows easy puller centring minimizing the risk of shaft damage

Thông số kỹ thuật

Designation TMHP 10E
Description Advanced hydraulic jaw puller kit
Contents 1 x arm-assembly stand
3 x arms, 115 mm (4.5 in.)
3 x arms, 160 mm (6.3 in.)
3 x arms, 200 mm (7.8 in.)
1 x hydraulic spindle TMHS 100
3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in.)
1 x nosepiece with centre point for hydraulic spindle
Maximum stroke 80 mm (3.1 in.)
Weight complete kit 14,5 kg (32 lb)
Cycle life hydraulic cylinder Minimum 5000 cycles up to 100 kN (11.2 US ton force)
Threading hydraulic cylinder UN 1½” x 16 tpi
Safety valve setting hydraulic cylinder 105 kN (11.8 US ton force)
Carrying case dimensions 578 x 410 x 70 mm (23 x 16 x 2.8 in.)
Nominal working force 100 kN (11.2 US ton force)
Arm set 1 (3 x TMHP 10E-10)   Effective arms length 115 mm (4.5 in.)
Width of grip 75-170 mm (3.0-6.7 in.)
Claw height 8 mm (0.3 in.)
Arm set 2 (3 x TMHP 10E-11)   Effective arms length 160 mm (6.3 in.)
Width of grip 80-250 mm (3.1-9.8 in.)
Claw height 8 mm (0.3 in.)
Arm set 3 (3 x TMHP 10E-12)   Effective arms length 200 mm (7.9 in.)
Width of grip 110-280 mm (4.3-11 in.)
Claw height 8 mm (0.3 in.)