Máy đo độ dày lớp phủ kiểu ăn mòn điện hóa GalvanoTest

Model: GalvanoTest
Hãng sản xuất: ELEKTROPHYSIK,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Máy đo độ dày lớp mạ GalvanoTest
  • Máy đo độ dày lớp mạ kiểu ăn mòn điện hóa GalvanoTest
  • Máy đo độ dày lớp phủ bằng phương pháp ăn mòn điện hóa
  • Máy đo độ dày lớp phủ bằng phương pháp Coulometric
  • Máy đo độ dày lớp mạ bằng phương pháp ăn mòn lớp mạ
  • May do do day lop ma kieu an mon dien hoa
  • May do do day lop ma bang phuong phap an mon

The GalvanoTest is a device to measure coating thickness based on the Coulometric principle and be used for virtually all electroplated single or multi-layered coatings. The electroplated coatings like chromium, nickel, cadmium, copper, brass, silver, gold, tin, zinc can be measured on metals or non-metals.

The coating thickness gauge, Galvano Test, is available in two models:

  • GalvanoTest 2000: the electrolyte is moved by a pulsator nozzle
  • GalvanoTest 3000: large electrolyte volumes moved by a circulation pump enable quick serial measurements. Suited for use on very small parts and to measure gold layers.

The anodic dissolution method, also known as Faraday’s Coulometric method, works on the lines of the electroplating process: electric current passed through an electrolyte separates individual metal coatings from the substrate. By measuring the current and time the Galvano Test determines the thickness of the coating separated.

Measuring range: 50 nm – 75 µm / 0.002 – 3 mils.

Thang.Ld@doluongbaotri.com.vn 0936 983 953 Liên hệ mua hàng
Property Value
Coating/substrate combinations
  • more than 70 coating/substrate combinations (standard version)
  • coatings on flat and curved surfaces
  • coatings on small components and wires
  • 10 preset types of metal: Cr, Ni, Cu, brass, Zn, Ag, Sn, Pb, Cd, Au
  • 8 further metal coatings for special applications
  • measuring range: 0.05…75 μm
Measuring cell
  • with circulation pump
Measuring surface
  • gasket 4 mm2/6.2 x 10-3 inch2
  • mask 1 mm2/1.55 x 10-3 inch2
  • mask 0.25 mm2/0.388 x 10-3 inch2 (deplated area nearly invisible)
  • electrolyte cup 0.25 mm2 to approx. 16 mm2/(0.388–24.8) x 10-3 inch2 (optional)
Adjustable settings for optimum results
  • maximum of 8 deplating speeds in the range of approx. 0.3–40 μm (0.012–1.57) mils/min
  • directly adjustable calibration factors; individual setting according tometal type and measuring surface
  • calibration setting with the aid of thickness standards
  • variable shut-down speed to suppress interference or for measuring alloy zonesbetween coating and substrate
Data storage with GalvanoTest
  • number of memories for various metals: 18
  • number of readings which can be stored and evaluated: 2000
  • non-volatile memory retains all calibration settings, readings and statistical valuesafter the gauge has been switched off
Statistical evaluation
  • display of 6 statistical values – mean value, standard deviation, coefficient of variation,number of readings, highest and lowest single reading
  • immediate or delayed display of statistical values
  • immediate or delayed print-out of readings and statistics
  • display and print-out of date and time – year, month, day, hour and minute
GalvanoTest interfaces for peripheral devices
  • interface for MiniPrint data printer
  • interface for an RS 232 C for connection to a PC
  • analog output for connection to an x-t recorder to chart voltage curve
  • Electrolyte alarm/saturation indicator
Measuring uncertainty
5 % of reading on a measuring area of 8 mm2 after calibration
Power supply
110/220 V 50…60 Hz/10 Watt
Dimensions and weight
260 mm x 250 mm x 100 mm/10.24 inch, 9.85 inch, 3.94 inch; approx. 2.5 kg (gauge)
support with integrated pump approx. 3.0 kg
Features
  • print-out diagram showing measuring cell voltage levels over the coating; especially useful for detecting alloy zones between coating and substrate; with MiniPrint
  • operator guide to the alphanumeric displays with language option:German, French or English
  • unit of measurement in either metric (μm) or British system (mils)
  • when switched on, the gauge displays details of the last readings
  • illuminated voltmeter for monitoring the deplating process
  • easy to use – clearly-designed controls and easy-to-follow operating instructionswith numerous examples
  • wide range of extras for measurements on small components,wire and multi-layer coatings

Có thể bạn quan tâm

Bút đo độ dày lớp phủ kết nối Bluetooth Elektrophysik SmarTest

Model: SmarTest

Máy đo độ dày lớp phủ Elektrophysik MiniTest 650

Model: MiniTest 650
Máy đo độ dày lớp phủ

Máy đo độ dày lớp phủ QNIX 7500

Model: 7500

Máy đo độ dày lớp sơn QNIX 4500

Model: QNIX 4200, QNIX 4500
Máy đo độ dày lớp sơn

Máy đo độ dày lớp sơn xe ô tô QNIX Carcheck

Model: CarCheck System PLUS

Máy đo chiều dày lớp phủ Elektrophysik MiniTest 7400

Model: MiniTest 7400

Máy đo độ dày lớp sơn QNIX 1200, 1500

Model: 1200, 1500
Máy đo độ dày lớp phủ lớp mạ

Máy đo độ dày lớp phủ Elektrophysik MiniTest 3100

Model: MiniTest 3100

Máy đo độ dày lớp phủ Elektrophysik MiniTest 725, 735, 745

Model: MiniTest 725, 735, 745

Máy đo độ dày lớp phủ QNIX 8500

Model: 8500

Máy đo độ dày lớp phủ Elektrophysik MiniTest 2500 – 4500

Model: MiniTest 2500-4500

Máy đo độ dày lớp sơn Elektrophysik QuintSonic 7

Model: QuintSonic 7