Bộ cảo thủy lực tháo lắp vòng bi SKF TMHP 10E
Model: TMHP 10E, TMHS 100, TMHS 100-1, TMHS 8T, TMHP 10E-5, TMHP 10E-10, TMHP 10E-11, TMHP 10E-12
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Hãng sản xuất: SKF,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
- Cảo thủy lực tháo vòng bi SKF
- Cảo thủy lực tháo lắp vòng bi
- Dụng cụ tháo lắp vòng bi
- Bộ dụng cụ đóng vòng bi
- Cảo 3 chấu tháo lắp vòng bi
- Cảo vòng bi trong
- Cảo vòng bi ổ kín
- Bộ dung cụ tháo vòng bi
Effortless bearing dismounting up to 100 Kn
The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.
FIND A DISTRIBUTOR
- High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs
- The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.9 in), make the TMHP 10E suitable for use in a wide range of applications
- The self-locking arms minimise the risk of the puller slipping from the application when under load
- Hydraulic spindle facilitates effortless dismounting
- The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
- Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
- Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
- The spring-loaded centre point of the hydraulic spindle allows easy puller centring minimizing the risk of shaft damage
Thông số kỹ thuật
| Designation | TMHP 10E | |
| Description | Advanced hydraulic jaw puller kit | |
| Contents | 1 x arm-assembly stand | |
| 3 x arms, 115 mm (4.5 in.) | ||
| 3 x arms, 160 mm (6.3 in.) | ||
| 3 x arms, 200 mm (7.8 in.) | ||
| 1 x hydraulic spindle TMHS 100 | ||
| 3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in.) | ||
| 1 x nosepiece with centre point for hydraulic spindle | ||
| Maximum stroke | 80 mm (3.1 in.) | |
| Weight complete kit | 14,5 kg (32 lb) | |
| Cycle life hydraulic cylinder | Minimum 5000 cycles up to 100 kN (11.2 US ton force) | |
| Threading hydraulic cylinder | UN 1½” x 16 tpi | |
| Safety valve setting hydraulic cylinder | 105 kN (11.8 US ton force) | |
| Carrying case dimensions | 578 x 410 x 70 mm (23 x 16 x 2.8 in.) | |
| Nominal working force | 100 kN (11.2 US ton force) | |
| Arm set 1 (3 x TMHP 10E-10) | Effective arms length | 115 mm (4.5 in.) |
| Width of grip | 75-170 mm (3.0-6.7 in.) | |
| Claw height | 8 mm (0.3 in.) | |
| Arm set 2 (3 x TMHP 10E-11) | Effective arms length | 160 mm (6.3 in.) |
| Width of grip | 80-250 mm (3.1-9.8 in.) | |
| Claw height | 8 mm (0.3 in.) | |
| Arm set 3 (3 x TMHP 10E-12) | Effective arms length | 200 mm (7.9 in.) |
| Width of grip | 110-280 mm (4.3-11 in.) | |
| Claw height | 8 mm (0.3 in.) | |
