Bộ đo và giám sát tốc độ quay SHIMPO DT-5TXR 5TFR 5TVR

Model: DT-5TXR 5TFR 5TVR
Hãng sản xuất: SHIMPO,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Máy đo tốc độ vòng quay SHIMPO
  • Thiết bị đo tốc độ vòng quay SHIMPO
  • May do toc do vong quay
  • Thiet bi do toc do quay
  • Máy đo tốc độ quay động cơ
  • Máy đo tốc độ quay cánh quạt
  • Máy đo tốc độ quay kiểu tiếp
  • Máy đo tốc độ vòng quay
  • Bộ hiển thị tốc độ vòng quay
  • Bộ đo và hiển thị tốc độ vòng quay
  • Bộ đo và giám sát tốc độ quay

DT-5TXR/5TFR/5TVR Series High-Performance Tachometers

A high-performance panel-mount meter equipped with dual sub-indicators, having excellent waterproof properties (equivalent to IP66) and simple setting features. It accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers, as well as analog input (basic input: DT-5TXR, differential input: DT-5TFR, voltage input: DT-5TVR). Provided with a memory function to store and indicate the maximum and minimum values.

Features

Provided with various functions including calibration, memory, and prescaling
The tachometer accepts input signals from various devices such as magnetic sensors and line drivers, as well as analog input.

Simple setting

  • Various input/output functions can easily be added and modified, simply by inserting an optional board as a replacement. (Optional boards are sold separately.)

The dual sub-indicators enable the operator to check the upper and lower limit values at a glance

Excellent waterproof properties

Capable of accepting high-speed input at 100 kHz (DT-5TXR, DT-5TFR)

  • The space-saving design, DIN W96 x H48 x D92 mm (panel inside 83 mm), allows combination with a compact machine without difficulty.

Provided with a memory function to store and indicate the maximum and minimum values

Measurement modes

DT-5TXR/5TFR

RPM or Rate Measurement Mode The device serves as a tachometer or a speedometer, and indicates values proportional to the input.
Elapsed Time Measurement/Monitoring Mode The device indicates values inversely proportional to the input. The values are either displayed by the hour, minute, and second, or displayed in units of 1/100 seconds.
Suited for indicating the transit time on conveyor belts or the like.
Process Time Measurement Mode The device measures the duration for which the input signal stays ON or OFF. For example, it is possible to measure the time for various processes.
Flow Rate Measurement Mode In combination with a pulse-output flow meter, the device indicates the instantaneous flow rate according to the predetermined quantity of flow per pulse.

Specifications

format DT-5TXR/DT-5TFR
action mode Tachometer mode/Flowmeter mode Transit time mode Time width mode
Display 1 0 to 999999
6 digits
0:00: 00 ~ 9: 59: 59
(hour, minute, second, and decimal display)
0: 00: 00 ~ 0: 59: 59
(hour, minute, second, decimal display)
Part 2 0:00 to 999:99 (second: 1/100 second decimal display)
With zero suppress
Decimal point position 10-1 ~ 10-5
Display Main display: Red 7-segment LED, character height 15 mm, 6 digits, 
sub-display (2 pieces): Green 7-segment LED, character height 6.5 mm, 6 digits + 6 digits-Displayable
Input range 0.0067Hz-100kHz 10ms ~ 3600s
Measurement accuracy ±0.008% ±1 digit ±0.1% ±1 digit
filter 100kHz, 30kHz, 10kHz, 0.02kHz can be switched by parameter.
However, the magnetic sensor is only 10kHz and 0.02kHz, and the contact is only 0.02kHz.
Display cycle 0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 seconds (changeable by parameter setting)
Analog output, option output except BCD output also updates data in this cycle.
Analog output option updates data at 10ms or display cycle.
Depends on input signal
Prescale function Parameter setting method with front panel keys.
Teaching of display values ​​(matching) is also possible.
Memory function The maximum and minimum measured values ​​are stored and displayed on the sub display with a green LED.
Upper and lower limits The upper and lower limits can be displayed on the sub display with a green LED.
Auto zero function 0.1 ~ 150 seconds 0.1-3600 seconds
Prediction calculation The displayed value is updated according to the elapsed time after the pulse stops.
Insulation resistance 10 MΩ or more (at 500 VDC megger)
Withstand voltage AC1500V or more 1min
Noise resistance Power supply terminal Normal/common mode ±1500V
Vibration resistance Conforms to JIS C-0911 Vibration frequency 10-55Hz, Single amplitude 0.5mm, 10 minutes each in XYZ direction
Ambient temperature 0°C to 45°C (with no condensation)
Ambient humidity 35 to 85%RH (However, no condensation)
Ambient atmosphere No corrosive gas
Protection function Front panel IP66 (equivalent), rear terminal block IP20
Case material ABS resin
External dimensions W96 x H48 x D134 mm (DIN)
mass 300g (with output 350g

 

Model DT-5TVR
input mode Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6
Input range DC 0 ~ ±10V DC 0 to ±1V 1-5 VDC 4-20mA DC DC 0 ~ ±100V AC0-100V
Measurement resolution 1/5000
display Maximum setting value
(display resolution)
(at
maximum value of input range )
0 to 5000 (1 digit)
5002 to 1000 (2 digit)
10005 to 25000 (5 digit)
25010 to 50000 (10 digit)
50020 to 99980 (20 digit)
Decimal point position 101 ~ 104
Display Main display: Red 7-segment LED/Character height 15 mm/5 digits
Sub-display (2): Green segment LED/Character height 6.5 mm/5 digits+5 digits ㊀ display possible
Measurement accuracy ±0.5% (full scale) (at maximum value of input range)
Display cycle Update the display every 0.2, 0.5, 1, 2, 5, 10 seconds. (Can be changed by parameter)
Average the input between updates and display the value.
moving average The data for 3 or 10 display cycles is averaged and displayed.
scaling Set the voltage (current) and display area for two points.
Fitting function Scaling is automatically performed by setting the display value at a certain input.
Memory function The maximum and minimum measured values ​​are stored and displayed on the sub display with a green LED.
Upper and lower limits The upper and lower limits can be displayed on the sub display with a green LED.
Peak display When the DOP-RMT option for external signal input is installed
, you can select average display, peak display, or bottom hold display by external signal input .
The peak/bottom selection is set by a parameter.
Auto zero When the displayed value is less than the parameter setting value, the display is set to zero.
Zero set Cancel input drift etc. Press the SET key to perform zero set.
Enable/disable can be set by the front panel (selectable by function 7)
Minimum display digit fixed to zero The minimum digit of the display or the minimum digit of 2 can be fixed to 0
Input sampling period 100 ms
Insulation resistance 10 MΩ or more (at 500 VDC megger)
Withstand voltage AC1500V or more 1min
Noise resistance Power supply terminal Normal/common mode ±1500V
Vibration resistance Conforms to JIS C-0911 Vibration frequency 10-55Hz, Single amplitude 0.5mm, XYZ direction 10 minutes each
Ambient temperature 0°C to 45°C (with no condensation)
Ambient humidity 35 to 85%RH (However, no condensation)
Ambient atmosphere No corrosive gas
Protection function Front panel IP66 (equivalent), rear terminal block IP20
Case material ABS resin
External dimensions W96 x H48 x H134 (DIN)
mass 300g (350g with output)