Bộ hiển thị tốc độ vòng quay SHIMPO DT-601CG

Model: DT-601CG
Hãng sản xuất: SHIMPO,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Máy đo tốc độ vòng quay SHIMPO
  • Thiết bị đo tốc độ vòng quay SHIMPO
  • May do toc do vong quay
  • Thiet bi do toc do quay
  • Máy đo tốc độ quay động cơ
  • Máy đo tốc độ quay cánh quạt
  • Máy đo tốc độ quay kiểu tiếp
  • Máy đo tốc độ vòng quay
  • Bộ hiển thị tốc độ vòng quay
  • Bộ đo và hiển thị tốc độ vòng quay
  • Bộ đo và giám sát tốc độ quay

The previous DT-6CG Series bidirectional digital counter with an arithmetic function has undergone a full model change to launch this new series. Equipped with a drip-proof front panel (equivalent to IP66), which is suited for use in environments such as places where food or pharmaceuticals are manufactured. In addition, the following features have been added to handle a wide range of measuring environments: universal voltage compatibility (AC 85-264 V), BCD output, and compliance with the RoHS Directive.

Features

A full model change of DT-6DG

Capable of a wide range of unit conversion and indication 

A new design with a drip-proof front panel (equivalent to IP66)

  • Suited for food and pharmaceutical production lines

Universal voltage (AC 85-264 V)

  • A DC12-24 V type is also available upon request at the time of order.

BCD output

  • Compatible with various input/output types to adapt to a wide range of measuring environments. (Analog output and line receiver input are optional.)

Compliant with the RoHS Directive

  • Compliant with the regulation that restricts the use of certain hazardous substances in electrical and electronic equipment.

Models/Options

No. Code Description
1 None Single phase input (individual, command) *1
RE Dual phase input (phase) *1
2 None Without BCD signals
B With BCD signal output *2
BI With BCD signal input *2
3 None Universal voltage (AC 100-200 V)
DC Universal voltage (DC 12-24 V)
4 None
4L Digital switch with 4-digit input
6L Digital switch with 6-digit input

*1: Select the dual phase input for a 2-phase encoder. Bidirectional counting using an encoder is not possible with a single
      phase input model.
*2: Output and input cannot be used simultaneously.

Operational Modes Count-up, Count-down, Reversible
Input Signals NPN open collector signals; Voltage pulse signals (L: 2 V or less, H: 3.8-30 V)
Power Source AC power source type: 85-264 V (50/60 Hz); DC power source type: 12-24 V (±10%)

Specifications

Model DT-601CG
type Reversible integration counter with calculation function 2 steps preset output
Operating method Addition, subtraction, addition/subtraction
display LED 6 digits Character height 14mm Red
Display range -99999 ~ 999999
Measuring range 3 round step, endless, overtime display selectable
Prescale Magnification per signal 1 x 10 -9 to 9999 can be set arbitrarily
Decimal point display 1 to 3 digits after the decimal point can be arbitrarily selected
Blackout memory 100,000 times in 10 years
Input method Individual, command, phase difference (RE type)
input signal NPN open collector signal, voltage pulse signal (L: 2V or less, H3.8 to 30V)
Reset method Manual reset, external reset
External reset signal 50 ms or more NPN open collector or contact signal
Count inhibit signal response time 50 ms or more NPN open collector or contact signal
Power supply output for sensor DC12V ± 10% 100mA MAX (DC24V 60mA is also available as an option)
Applicable detector Rotary encoder, proximity switch, photoelectric switch, gear sensor, contact
Ambient temperature 0~45℃
Ambient humidity 30 to 80%RH (no condensation)
Ambient atmosphere No corrosive gas
power consumption AC power supply about 20VA or less / DC power supply about 6VA or less
Power supply AC specification 85 to 264V (50/60Hz) / DC specification 12 to 24V (±10%)
Case material Housing: ABS resin glass (black) / Terminal block: PBT black
External dimensions W96 x H48 x D130 mm
mass About 400g
Protection class Equivalent to IP66 (front part)
accessories 2 terminal block covers (transparent acrylic), rubber packing (NBR black), unit label