Máy đo độ dày lớp phủ Linshang LS220

Model: LS220
Hãng sản xuất: LINSHANG,
Tình trạng: Còn hàng
Bảo hành: 12 tháng
Giá:Liên Hệ
  • Máy đo độ truyển ánh sáng vật liệu
  • Máy đo độ cản ánh sáng của tấm kính
  • Máy đo mật độ ánh sáng
  • Máy đo độ truyền ánh sáng
  • Máy độ truyền phổ ánh sáng
  • Máy đo độ dày tấm kính
  • Máy đo ánh sáng màu sắc
  • Máy đo cường độ ánh sáng
  • Máy đo độ bóng
  • Máy đo độ mờ đục
  • Máy đo màu

Automotive paint meter, also called car paint meter, is a special instrument for detecting the automobile substrate surface coating thickness. The covering surface of a car basically has a paint coating. Using a automotive paint meter to measure the paint surface coating thickness can directly determine the sheet metal and spray paint of a car. It can also indirectly determine the damage degree of the car. The LS220 automotive paint meter has small size and is especially suitable for carrying around when going out for inspection. This car paint thickness gauge has the characteristics of fast test speed, stable test data, high measurement accuracy and so on.

Function

1. Probe tip: Built-in integrated probe
2. Measuring range: 0-2000um
3. Accuracy: ≤±(3% reading+2μm)
4. No calibration, just zero adjustment.
5. One hand operation, only one button.
6. Fast measurement, 0.5s measuring interval.
7. Wear-proof ruby probe tip for long-term use.
8. The gauge automatically identify the substrate and switch measurement mode rapidly.
9. “”Fe””, “”NFe””, “”Fe/NFe”” three measurement modes can be set.
10. Measuring non-magnetic coatings on steel or iron and measure non-conductive coatings on non-magnetic metal substrates in one gauge.
11. Thanks to the use of the most-advanced digital probe technology, these sensors are unsusceptible to interference and provide an excellent measuring accuracy. Even variations in temperature will not affect measurement and readings remain stable to ensure a very good reproducibility over the complete measuring range.

Thông số kỹ thuật

Parameter LS220 Coating Thickness Gauge
Probe tip  Ruby fixed
Measuring principle Fe:Hall Effect / NFe: Eddy current
Probe type Built-in integrated probe
Measuring rang 0.0-2000μm
Resolution 0.1μm:(0μm-99.9μm)
1μm:(100μm-999μm)
0.01mm:(1.00mm-2.00mm)
Accuracy  ≤±(3% reading+2μm)
Unit  μm / mil
Measuring interval 0.5s
Minimum measuring area Ø = 25mm
Minimum curvature  Convex:5mm / Concave:25mm
Minimum substrate thickness  Fe:0.2mm / NFe:0.05mm
Display  128×48 dot matrix LCD
Power supply  2pcs of 1.5V AAA alkaline battery
Range of operation temperature  0℃-50℃
Storage temperature range  -20℃-60℃
Host size  101*62*28 mm
Probe size  71*26*22 mm
Weight(with battery)  79 g