Thiết bị hiệu chuẩn đa năng phòng nổ BEAMEX MC6-EX

The MC6-Ex is an intrinsically safe field calibrator and communicator. It is ATEX, IECEx and North American certified and can be used in all hazardous zones / divisions. The MC6-Ex includes a field communicator for HART, FOUNDATION Fieldbus and Profibus protocols.

The safest choice

• If you use a non-Ex calibrator, you need to spend time and effort on hot work permits. Using an intrinsically safe calibrator in hazardous areas is the easiest and safest choice.
• We made the MC6-Ex ATEX and IECEx certified for every Ex zone, so you can take it to Zone 0, Zone 1 and Zone 2 (Division 1 / Division 2).
• The MC6-Ex is the safest choice for all your hazardous areas.

Accuracy guaranteed

• We made the MC6-Ex a very accurate, reliable and stable calibrator.
• Each calibrator is delivered with a traceable, accredited calibration certificate as a standard.
• Take a look at the brochure for detailed uncertainty figures.

Integrated field communicator

• We equipped MC6-Ex with an integrated field communicator for HART, FOUNDATION Fieldbus H1 and Profibus PA so you can communicate with smart instruments.
• Each communicator is a separate feature, so you can pick the ones you need, or add them later on.
• You can configure, calibrate and trim your smart instruments with this single tool.

Paperless calibration

We made the MC6-Ex a documenting calibrator.

When you use it with Beamex calibration software (Beamex CMX or Beamex LOGiCAL) you have a fully paperless calibration process. You no longer have to write calibration results on paper, perform manual error calculations or manually type results into software. The whole calibration process is electronic and fully paperless, which saves time and reduces the risk of errors.

You can also integrate the Beamex solution into your company’s ERP system for a paperless flow of work orders and calibration results.

For the mobile worker

• We made the MC6-Ex a really versatile device.
• When you have a multifunctional process calibrator for pressure, temperature and electrical signals combined with a multi-bus field communicator in one robust, easy to carry, IP65 (dust and water) casing, you can carry less.
• We think it is easier to carry just one device when you go out to the field.

Data integrity – pharmaceutical and regulated industry

When you use the Beamex MC6 family calibrators together with Beamex CMX calibration management software, you have a solution that ensures the integrity of the calibration data throughout the whole calibration process.

Technical specifications

• Screen: Screen of 5.7 inches in backlit and tactile color
• Power supply: Internal power supply for powering a loop/instrument
• Measuring modules: Up to three internal pressure measuring modules and connection for external modules
• Battery: Intelligent replaceable battery
• Communicator: Integrated field communicator
• Capacities: Ability to document calibrations and a data record
• Communication: Communication with pressure controllers and dry temperature blocks in a safe area
• Pressure measurement: Internal/external pressure modules
• Voltage measurement: ± 500 mV y ± 30 VDC
• Current measurement: ± 100 mA (internal or external supply)
• Frequency measurement: 0 … 50 kHz
• Pulse count: 0 … 10 Mpulse
• Voltage generation: ± 500 mV y -1.5 … 10.5 VDC
• Power generation: 0 … 25 mA (assets / liabilities, i. e. internal or external supply)
• Resistance measurement: Two simultaneous channels (0 … 4 kΩ)
• RTD Measurement: Two simultaneous channels
• TC measurement: Two simultaneous channels (universal connector / mini-plug)
• Simulations: RTD simulation, TC simulation, resistance simulation (0… 4 k?)
• Frequency generation: 0 … 3 kHz
• Click Queue Generation: 0 … 10 Mpulse
• Warranty: 1 año